190753FR - $1.00

Years: All
Grommet (Replacement For Crank Pulley)4 Required

190760 - $13.00

Years: 1939-52
Pump Drive Shaft (3/4 Dia. -13 1/16" Long-5/8 Left Hand Thread)For Use W/ Part # 192196 Hub And Part # 192152 Pulley

191196 - $31.75

Years: 1939-52
Pump Drive Hub (5/8 Left Hand Threaded W/ 4 - 11/32" Pins For Use W/ Part # 192152 Pulley And Part # 190760 Shaft

192161 - $36.00

Years: 1939-52
Pump Drive Hub (6 Spline 3/4" O.D W/ 4 - 1/4" Holes For Use W/ Part # 192160 Pulley And Part # 194354 Shaft

194354 - $25.00

Years: 1939-52
Pump Drive Shaft (3/4 Dia. -13" Long- 6 Spline)For Use W/ Part # 192161 Hub And Part # 192160 Pulley

230042XHD - $20.00

Years: 1939-54
Spring Steel Stabilizer Bar (HEAVY ITEM MAY REQUIRE ADDITIONAL S&H)

230044WNL - $1.25

Years: All
Stabilizer Bracket Pin

230300 - $0.00

Years: 1948-56
Swinging Drawbar(Made Like The Original)(Used with 8N 802B And C Clevis And 8N804 Pin) (HEAVY ITEM MAY REQUIRE ADDITIONAL S&H) (OUT OF STOCK)

231253XHD - $58.00

Years: 1939-54
Heavy Duty Stabilizer Bar Kit ( Includes 2 Stabilizer Bars, 2 Brackets, Pins And Hardware) (HEAVY ITEM MAY REQUIRE ADDITIONAL S&H)

231254R - $9.00

Years: All
Bracket(Stabilizer Bar & Fender Support )

2N 512 - $15.00

Years: 1942-52
Quadrant Lever

2N 516-B - $15.00

Years: 1939-64
Hydraulic Lift Control Plate ( 9N-4000)

2N 624 - $6.50

Years: 1939-64
Draft Control Spring Seat

351963-S - $0.45

Years: All
Rivet Replacement Roll Pin(Leveling Box Crank To Gear)

352625-S8 - $4.25

Years: 1939-54
Clevis Pin(Hydraulic Lift Rocker To Yoke & Rocker to Housing For 9N-2N Tractors Only)-3/4x3.14"

356087-S - $1.00

Years: All
Castle Nut (Lower Link Support Pin)5/8"-18

374072-S - $2.50

Years: 1948-52
Draft Control Arm Cam Pin

74127-S - $1.00

Years: 1939-54
Leveling Box Expansion Plug

8N 486-B - $5.00

Years: 1950-54
Hydraulic Lift Yoke Pin

8N 527 - $14.50

Years: 1948-54
Draft Control Spring Plate [With Pin]

8N 540-A2 - $48.50

Years: 1948-52
Link Assembly (Connecting Draft Control)

8N 541B - $34.50

Years: 1948-64
Plunger (Hydraulic Lift Draft Control Spring)

8N 545B - $80.00

Years: 1948-52
Cam [ Hyd. Lift] (8N ONLY)

8N 546C - $25.00

Years: 1948-52
Yoke [Hyd. Lift Plunger]

8N 564B - $40.00

Years: 1939-54
Rod Assy.(Hydraulic Lift Leveling LH)

8N 569B - $60.00

Years: 1939-54
Leveling Box Assembly ( Includes Fork,Box,Knuckle & Pin)

8N 638 - $28.00

Years: 1939-52
Valve Assembly (Hydraulic Pump Safety) Fits Tractors: 9N, 2N, 8N.

8N 660 - $4.25

Years: 1939-54
Eyelet Assembly With Nut & Washer (Check Chain)

8N 7011 - $0.65

Years: 1939-54
Gasket (Transmission Drain Plug)

8N 804 - $32.00

Years: 1948-54
Swinging Draw bar Clevis Pin (Use With Original Hanger ONLY]

957E560 - $1.25

Years: 1939-57
Upper Link Pin (Bright Zinc Plated) 9NThru 900

957E5967 - $21.00

Years: 1939-81
Anchor (Drawbar Link Check Chain) Right & Left Anchor. Fits Tractors: 9N, 2N, 8N (1939-1952), NAA (1953-1954), 600, 700, 800, 900 (1955-1957), Dexta, Super Dexta (1958-1964), 2000, 4000 (1962-1964), 2000, 3000, 4000 (1965-1975), 2600, 3600, 4600 (1975-1981), 2610, 3610, 4610 (1981-2/1991). Replaces NCA597B

9N 502 - $1.75

Years: 1939-52
Gasket (Hydraulic Lift Housing Cover)

9N 510-D - $95.00

Years: 1939-52
Cylinder [ Hydraulic Lift] Fits Tractors: 9N, 2N, 8N.

9N 518 - $1.00

Years: 1939-64
Friction Disc (Lever Assembly To Quadrant) 3" O.D., .566" I.D., .175" thick. Tractors: All Models

9N 5182 - $56.00

Years: 1939-54
Draw-bar (Heat Treated) 30-1/2" L hole center to hole center, 2-1/2" W, 1-1/8" thick. (HEAVY ITEM MAY REQUIRE ADDITIONAL S&H)

9N 521 - $5.50

Years: 1939-64
Stop Assembly (Lever Retainer) Improved Unit, Includes Wing Nut 350890S36 And Flat Washer. Fits Tractors: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000.

9N 522-A - $6.50

Years: 1939-64
Spring Washer(Lever To Shaft)

9N 523-B - $0.60

Years: 1939-42
Gasket (Lower Link Support Plate)

9N 525-B - $7.00

Years: 1939-57
Seat (Hydraulic Lift Draft Control Spring)

9N 527 - $12.00

Years: 1939-47
Draft Control Spring Plate

9N 529 - $2.00

Years: 1939-62
Draft Control Spring Seat Felt Fits Tractors: 9N, 2N, 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901.

9N 530B - $20.00

Years: 1939-52
Hyd Lift Piston [Three Ring]2-1/2" O.D. (Uses 9N 675 Ring Set) Optional With NAA 530-B When Used With O-ring NAA 533-A & Washer NAA 473-A. Fits Tractors: 9N, 2N, 8N.

9N 531-C - $13.50

Years: 1939-64
Bushing (Hydraulic Lift Shaft) I.D. 2.000", O.D. 2-3/8", L. 3.00". Tractors: All Models (1939-1964), 2000, 3000 (Except 3550), 4110 (1965-11/1971).

9N 532 - $0.75

Years: 1939-54
Disc Quadrant To Cover Gasket

9N 5370 - $50.00

Years: 1939-54
Chain Assembly (Fixed Drawbar Safety) Fits Tractors; 9N, 2N, 8N, NAA.

9N 5374 - $7.75

Years: 1939-54
Stay (Drawbar) Upper (2 Reqd.)( (Uses Bolting Kit 20892-S8)

9N 5375 - $7.75

Years: 1939-54
Stay (Drawbar) Lower (2 Reqd.)(Uses Bolting Kit 20892-S8)

9N 543B - $60.00

Years: 1939-54
Arm (Hydraulic Lift Shaft)

9N 550 - $4.00

Years: 1939-54
Upper Lift Arm Locking Tab

9N 552 - $0.35

Years: 1939-52
Gasket (Hydraulic Cylinder To Lift Cover)

9N 553 - $0.75

Years: 1939-52
Gasket (Hydraulic Cylinder To Lift Cover)

9N 554 - $15.50

Years: 1939-54
Leveling Box Bearing

9N 555-B - $48.50

Years: 1939-52
Lower Lift Arm Heavy-Duty With Forged Ball-Joint Ends. Category 1 Accommodates 7/8" Drawbar Or Lower Link Pins. Painted Black. Length 32". Replacement For Ford 9N555B Right Or Left. (HEAVY ITEM MAY REQUIRE ADDITIONAL S&H)

9N 563 - $30.00

Years: 1939-47
Shaft (Lower Link Support)

9N 566 - $7.50

Years: 1939-54
Knuckle (Rod to Lift Arm)

9N 582-B - $1.25

Years: All
Clevis (Draw bar Link Check Chain)

9N 585-A - $26.00

Years: 1939-54
Leveling Box Fork RH. 3/4" Thread, Length 10-1/4". Fits Tractors: 9N, 2N, 8N, NAA.

9N 594 - $6.25

Years: 1939-64
Leveling Box Handle

9N 595 - $1.50

Years: 1939-54
Pin [ Three Pt. Knuckles]

9N 598-B - $39.00

Years: 1939-57
Lift Arm Stay Chain Kit ( 2 Anchors, 2 Eyelets, 2 Chains, And 4 Clevises W/ Pins And Hardware)

9N 599 - $2.50

Years: All
Check Chain (Drawbar Link)

9N 611 - $1.75

Years: 1939-52
Gasket (Pump Base To Center Housing) Fits Tractors: 9N, 2N, 8N

9N 613 - $1.50

Years: 1939-52
Gasket (Valve Chamber To Base) Fits Tractors: 9N, 2N, 8N.

9N 615 - $30.00

Years: 1939-52
Piston (Hydraulic Pump) Fits Tractors: 9N,2N,8N.

9N 617-A - $52.00

Years: 1939-52
Cam Block (Hydraulic Pump)

9N 621 - $0.00

Years: 1939-52
Chamber Assembly (Hydraulic Pump Valve) RH

9N 621 Kit - $28.00

Years: 1939-52
Repair Kit (For Hydraulic Pump Chamber)

9N 622 - $0.00

Years: 1939-52
Chamber Assembly (Hydraulic Pump Valve) LH

9N 640 - $30.00

Years: 1939-47
Valve Assembly (Hydraulic Pump) Has "T"Shaped Construction Fits Tractors: 9N, 2N.

9N 649-A - $21.00

Years: 1939-52
Bushing (Power Take-Off Shaft) In Valve Chamber

9N 675 - $7.00

Years: 1939-52
Lift Piston Rings[Set of Three]

B9NN 568A - $8.00

Years: 1939-54
Leveling Box Gear

CBPN 804A - $2.00

Years: 1953/
Swinging Draw Bar Clevis Pin And Clip Kit, Pin (C5NN807D) And Spring Clip (311920).Fits Tractors NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000.(1953 And Up)

CCPN600AB - $41.00

Years: 1953-64
Hydraulic Pump Repair Kit.Fits Four Cylinder Gas Or Diesel Tractors With Piston Type Pump. Tractors: NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Will Service Either NCA600C or NCA 600F Pump. Replaces CCPN600A & CCPN600B.

CONN 805F - $34.00

Years: 1948-52
Swinging Drawbar

DBL2 - $19.00

Years: 1939-54
Draw-bar Lock (Keeps 11 Hole Draw-bar From Turning) Category I. Fits All Category I, 3-Point Hitch Equipped Tractors. Prevents Cross 11 Hole Draw-bar From Rotating. Will Work With Stay Bars.

DKLP 200 - $1.00

Years: All
Linch Pins (Bright Zinc Plated) 4 For $1.00

DKPWCH - $0.75

Years: All
Linch Pin W/Chain

HPOK-1 - $240.00

Years: 1939-52
Over Haul Kit Hydraulic Pump (Chambers Not Included)

HPOK-2 - $450.00

Years: 1939-52
Hydraulic Pump Over Haul Kit(Chambers Included)

JSA 1012C - $21.00

Years: 1939-54
Top Link 12" Body, Category I Implement Ends. Adjusts 16" To 24" Overall. Dichromate Plated.

L601-14 - $46.00

Years: 1939/
Pump Drive Coupler Kit. Contains; Morflex 302 Coupler, 2-3/4" Drive Flanges With Set Screws,4 Bolts & Lock Nuts.

L601-9 - $64.50

Years: 1939/
Pump Drive Coupler Kit. Contains; Morflex 352 Coupler, 2-3/4" Drive Flanges With Set Screws,4 Bolts & Lock Nuts.

LAS192 - $10.00

Years: All
Lower Lift Arm Repair End (Cat. #1 7/8 Pin Hole 5-1/4 Long

LCRK5354 - $6.00

Years: 1953-54
Lift Cover Repair Kit (Includes O-Rings and Gaskets)NAA ONLY

LCRK5564 - $7.50

Years: 1955-64
Hydraulic lift cover repair kit. Fits Tractors: 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000.(Includes O-Rings and Gaskets)

MHSKI - $30.00

Years: All
Stabilizer Kit (Mower Deck Height)Heavy Duty Brackets And Chains Attach To Tractor And Deck To Maintain A Consistent Cutting Depth And Stop Scalping Caused From Sagging Deck

NAA 473-A - $1.75

Years: 1939-54
Back-Up Washer-Used With NAA530-B&NAA533-A

NAA 502-A - $2.00

Years: 1953-54
Hydraulic Lift Housing Cover Gasket. Tractors: NAA.

NAA 530-B - $19.50

Years: 1939-54
Piston (Hydraulic Lift)-O-Ring type, 2-1/2" O.D. Tractors:9N,2N,8N,NAA (1953-1954). Optional for 9N, 2N, 8N When Used With O-Ring NAA533-A & NAA473-A

NAA 533-A - $0.75

Years: 1939-54
O-Ring (Hydraulic Lift Piston)-Used With NAA473-A&NAA530-B

NAA 927-C - $3.00

Years: 1942-54
Dipstick (Hydraulic) Fits Tractors: 9N, 2N, 8N, NAA.

NCA 502-A - $1.50

Years: 1955-64
Gasket (Hydraulic Lift Housing Cover)Fits All Models (1955-1964, except Majors).

NCA 535A - $60.00

Years: 1948-64
Rocker (Hydraulic Lift)

NCA 563-C - $17.50

Years: Several
Shaft(Lower Link Support)Fits Tractors: 8N, NAA, 600, 601, 800, 801, 1801, 2000, 4000 (1948 To 1964). Row Crop Hi Clearance: 700, 701, 900, 901 (1955 To 1964), 2000, 3000, 4000 (Without Differential Lock, 1965 To 1975), 3600, 4600 (1975 To 1981).

NCA 577A - $40.00

Years: 1939-64
Leveling Box Assembly ( Includes Box,Knuckle & Pin)

NCA 579B - $11.00

Years: 1939-64
Leveling Box Shaft With Pinion Gear 14" Long, 4" Thread Length, 3/4" Thread Diameter. Tractors: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000.

NCA 585-B - $40.00

Years: 1955/
Fork, Hydraulic Lift Leveling Rod, RH. 3/4" Thread, Length 14-3/4". Fits Tractors: 600, 800, Row Crop HiClear (1957 & Up)

NCA 700-38 - $120.00

Years: 1955-57
PTO Assembly (Complete and Ready To Install)-1-3/8" 6 Spline Includes Cap & Gasket. Fits Tractors: 600, 700, 800, 900. (HEAVY ITEM MAY REQUIRE ADDITIONAL S&H)

NCA 803A - $24.00

Years: 1948-52
Drawbar Clevis Assembly

NCA 809A - $43.00

Years: 1948-52
Drawbar Hanger

PT3 - $3.50

Years: All
Drawbar Pin (Aftermarket Drawbar Hanger Clevis Pin)

SDA6 - $105.00

Years: 1948-55
Swinging Drawbar Assembly. ( Contains Draw-bar,Hanger & Clevis Assembly.) Fits Tractors: 8N, NAA, 600 series. (HEAVY ITEM WILL REQUIRE ADDITIONAL S&H)